Table of Contents
Advertisement
Remote control/RC-70/RC-70E/RC-70X
Notes
¢
When
the power
plug is connected
to an AC
outlet, this unit enters the power standby mode
and the indicator lights. At that time, the unit can
be operated only with the POWER
key of remote
control transmitter.
First, enter the unit to the power on mode with the
POWER
key of remote
contro! transmitter, and
operate with the other keys.
Installing the battery on the remote
control unit
1. Remove the battery compartment cover.
2. Insert two size ''AA'' (R6) batteries confirming the correct
polarity and close the cover in its place.
Note;
——————___________
sess
The provided batteries are to be used for operation of the remote con-
trol unit, and it may have shorter life.
When
the remote
control unit becomes
effective only for shorter
distance or does not effective to operate, replace them with two new
batteries.
14 kc-207 (kK)
Usable range of remote control unit
The usable range of the remote control unit may differ on
temperature,
humidity
or using
conditions,
however,
it is
defined approximately as shown in the figure below:
For controlling audio
For controlling TV set (U.S.A. and military models)
KMT-1026/KMT-2026S
Note for remote control operation
After pressing one of operation keys, when the next
operation is required, press the next operation key firm-
ly after approx. 1 second interval.
When the next operation key is pressed immediately
after the previous key, it may cause misoperation.
Hide quick links:
Advertisement
Table of Contents
