Table of Contents
Advertisement
14. Menu Guide – [Setup] Menu
[System Frequency]
[59.94Hz (NTSC)]/[50.00Hz (PAL)]/[24.00Hz (CINEMA)]
* Default setting specifications vary depending on the country or area where the
camera was purchased.
This changes the system frequency of videos that are recorded and played back.
([System Frequency]:
[Pixel Refresh]
This optimizes the image sensor and image processing.
•
The image sensor and image processing are optimized when the camera is
purchased. Use this function when bright spots that do not exist in the subject get
recorded.
•
Turn the camera off and on after the pixels are corrected.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to the front of the
image sensor is performed.
•
You can use this function when the dust is particularly noticeable.
•
Turn the camera off and on after cleaning.
336)
595
Advertisement
Table of Contents
