Table of Contents
Advertisement
2. Getting Started – Charging the Battery
Removing the Battery
1
Set the camera on/off switch to [OFF].
2
Open the battery door.
•
Check that the card access light turned off and then open the battery door.
(Card Access Indications:
3
Push the lever (A) in the direction of the arrow and then remove the battery.
•
Ensure that no foreign objects are adhering to the inner side (rubber seal) of the
battery door.
•
Remove the battery after use.
(The battery will drain if left inserted in the camera for a long period of time.)
•
The battery becomes warm after use, during charging, and immediately after
charging.
The camera also becomes warm during use. This is not a malfunction.
•
Be careful when removing the battery as the battery will jump out.
(A)
60)
48
Advertisement
Table of Contents
