5. Focus/Zoom – Using AF
Magnify the AF Area Position ([AF-Point Scope])
This magnifies the focus point when the AF mode is [
other AF modes, the center of the screen is magnified.)
You can check focus and observe an enlarged subject as with a telephoto
lens.
1
Register [AF-Point Scope] to the Fn button.
2
Enlarge the AF area position by pressing and holding the Fn button.
•
When the screen is enlarged, pressing the shutter button halfway re-acquires
focus in a small central AF area.
•
When the screen is enlarged, turn
Use
•
When the screen is enlarged, [AFC] changes to [AFS].
•
When the following functions are being used, AF-Point Scope does not work:
– Video recording/[Post-Focus]
– [6K/4K Pre-Burst]
– [Miniature Effect] ([Filter Settings])
– [Multiple Exposure]
•
You can change the display method of the magnified screen:
[
]
[
for more detailed adjustments.
]
[AF-Point Scope Setting]
(Fn Buttons:
or
to adjust the magnification.
([AF-Point Scope Setting]:
131
], [
], or [
]. (In
471)
556)