Receiver Output Level - Shure ULXD1-V50 Manual

Wireless microphone system
Table of Contents

Advertisement

Note: Actual range depends on RF signal absorption, reflection and interference.Note: Actual range de­
pends on RF signal absorption, reflection and interference.
RF Tuning Step Size
25 kHz, varies by region
Image Rejection
>70 dB, typical
RF Sensitivity
-5
−98 dBm at 10 BER
Latency
<2.9 ms
Audio Dynamic Range
A-weighted, typical, System Gain @ +10
XLR Analog Output
Dante Digital Output
Total Harmonic Distortion
−12 dBFS input, System Gain @ +10
<0.1%
System Audio Polarity
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of
XLR output) and the tip of the 6.35 mm (1/4-inch) output.
Operating Temperature Range
-18°C (0°F) to 50°C (122°F)
Note: Battery characteristics may limit this range.
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
Note: Battery characteristics may limit this range.

Receiver Output Level

The following table describes the typical total system gain from the audio input to the receiver outputs:
Receiver Output Gain
Output Jack
1/4" TRS
XLR (line setting)
>120 dB
130 dB
System Gain (gain control = 0dB)
+18 dB
+24 dB
Shure Incorporated
34/49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ulx-dUlxd2/sm58-v50Ulxd2/sm86-h50Ulxd2/b87c-h50

Table of Contents