Table of Contents
Advertisement
4
Chimney and Termination Requirements
A. Chimney Requirements
Vertical distances are measured from the base of the
fireplace as shown in Figure 4.1.
Table 4.1 Chimney Requirements
Minimum overall straight height
Minimum height with single offset/
return
Double offset/return minimum height
Maximum height
Maximum chimney length between an
offset and return
Maximum distance between chimney
stabilizers
Maximum unsupported chimney
length between the offset and return
Maximum unsupported chimney
height above the fireplace
Maximum unsupported chimney
above roof
NOTICE:
A maximum of two pairs of offsets and returns
may be used.
WARNING! Risk of Fire!
in. (51 mm) air space clearance to insulation
and other combustible materials around the
chimney system. Failure to do so may cause
overheating and fire.
20 ft (6.10 m) max.
pipe between an
offset & return
Ceiling firestop
41-3/8 in.
(1051 mm)
Effective
Height
Figure 4.1
Chimney Requirements
Majestic Sovereign Series • SA36R/SA42R • Installers Manual • 4010-259 • Rev K • 1/22
16.5 ft
16.5 ft
20 ft
90 ft
20 ft
35 ft
6 ft
35 ft
6 ft
You must maintain 2
6 ft (1.83 m) max.
unsupported chimney
above roof
35 ft (10.7 m)
max. straight
unsupported
chimney height
16.5 ft (5.03 m) min. height/single offset-return
20 ft. (6.10 m) min. height/double offset-return
90 ft (27.4 m) max. height
NOTICE:
construction and check to be sure inadvertent loading has
not dislodged the chimney section from the fireplace or at
any chimney joint.
Table 4.2 Chimney Component Dimensions
5.03 m
45.03 m
HEIGHT OF CHIMNEY COMPONENTS
Chimney Stabilizer
6.1 m
SL3
27.43 m
Offsets/Returns
6.1 m
SL315
SL330
10.67 m
Chimney Sections*
SL306
1.83 m
SL312
10.67 m
SL318
SL324
1.83 m
SL336
SL348
* Dimensions reflect effective height.
You must provide support for the pipe during
in.
mm
4-3/4
121
13-3/8
340
15-1/2
394
4-3/4
121
10-3/4
273
16-3/4
425
22-3/4
578
34-3/4
883
46-3/4
1187
15
Advertisement
Table of Contents
