Gravely Promaster 44Z Owner's/Operator's Manual page 15

Hide thumbs Also See for Promaster 44Z:
Table of Contents

Advertisement

WARNING: Move the steering
control levers slowly and keep the
throttle control lever at slow
speed until you learn how to
operate the unit.
3. Bring the steering levers to neutral.
4. Slow the engine down to about 3/4
speed.
5. Turn ON the PTO switch to engage the
mower.
IMPORTANT: Never engage the PTO if the
mower is plugged with grass or other
material. This may cause damage to the
electric clutch.
6. Move throttle control to fast.
7. Move the steering levers forward to
obtain a slow ground speed.
8. To disengage the mower, move the PTO
switch to the "Off" position.
9. When you know how to operate the unit,
select a speed appropriate to your
mowing conditions.
PARKING
To park the unit:
1. Bring the steering levers to neutral. Turn
off PTO.
2. Move the throttle lever to the "Slow"
position.
3. Engage the parking brake.
4. Lower the attachment.
5. Turn the ignition key to the "Off" position
and remove the key.
MOVING THE UNIT WITH THE
ENGINE OFF
IMPORTANT: Never tow unit.
1. Shut OFF engine.
2. Place seat in the service position (See
Service Position on page 17).
3. Pull the right and left bypass levers to
the neutral position.
WARNING: Do not bypass
transmission when on a slope.
4. Disengage parking brake.
5. Push unit to desired location.
6. Engage parking brake.
7. Push the right and left bypass levers to
the drive position.
Push Lever In to Drive Position
Pull Lever Out to the Neutral Position
OF4105
OF4110
GB - 15
Figure 5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Promaster 48zPm44zPm48z991035991036

Table of Contents