Advertisement
3
INSTALL THE AIR COMPRESSOR AND ECU
DO NOT OVER TIGHTEN MOUNTING BOLTS AND NUTS ON THE AIR COMPRESSOR.
TOO MUCH TORQUE CAN CRUSH THE BRASS INSERTS AND RUBBER ISOLATORS.
1
Mount the Air Compressor
to the drill hole location
using the supplied fasteners.
DO NOT OVER TIGHTEN.
3088 10-32
NYLOCK NUT
3086 #10 FLAT
WASHER
Body of vehicle
(or optional Firestone
Air Accessory
Mounting Kit
– Part #2588)
3088 10-32 NYLOCK NUT
7
2
Mount the ECU to the drill
hole location using the
supplied fasteners.
9499 AIR COMPRESSOR
3086 #10 FLAT WASHER
3087 10-32 x 1" MACHINE SCREW
ECU
3086 #10 FLAT WASHER
3093 10-32 x 3/4" MACHINE SCREW
x 4
x 2
3
Mount the black ground wire
ring terminal using the sup-
plied fasteners. Assure that
the ring terminal makes
a solid contact with bare
metal for a proper ground.
3088 10-32 NYLOCK NUT
3086 #10 FLAT WASHER
10-16 x 3/4"
SELF-TAPPING SCREW
NOTE: You may want to
BLACK
combine other grounds
GROUND
to this mounting location.
WIRE
3088 10-32 NYLOCK NUT
BODY OR FRAME
OF VEHICLE
(or optional Firestone
Air Accessory
Mounting Kit).
x 10
x 6
BODY OR FRAME
OF VEHICLE
Air Accessory Mounting
Kit cannot be used
as a grounding
location for the
Air Compressor.
firestoneairide.com
Advertisement
