Advertisement
3
ACCESSIBILITY
When the remote is off,
press any button to turn
on the remote.
Not Connected! - If this warning
remains more than 30 seconds
after waking up the remote does
not detect an active ECU. It
could be caused by a wiring
issue, the ECU not getting power,
or an incorrect passcode.
2639 Installation Instructions
Hold the up and down arrows
at the same time to access the
remote settings screen.
Brightness - Adjust the intensity of the
backlit screen.
Timeout - Adjust how long the remote will
stay idle before turning off.
PSI/BAR - Select pressure unit of measure.
PSI - Imperial
BAR - Metric
AIR COMMAND SINGLE REMOTE QUICKSTART GUIDE
™
Passcode - Use all 4 buttons to
navigate and adjust the passcode
selection.
Hold down M1 and M2 to
access the passcode
entry screen.
*If also using the app the pass-
codes entered must both be the
same. Default passcode is 1234.
14
Advertisement
