Setting The Assistance Level - Bosch Kiox Original Operating Instructions

To reset the Kiox to its factory settings, select <Settings> → <Sys set-
tings> → <Factory reset>. All user data will be lost.

Setting the assistance level

On the operating unit (7), you can set the level of assistance you want the
eBike drive to provide you with while pedalling. The assistance level can be
changed at any time, even while cycling.
Note: In some models, the assistance level may be preset and cannot be
changed. There may also be fewer assistance levels available than stated
here.
The following assistance levels are available as a maximum:
– OFF: Drive assistance is switched off. The eBike can only be moved by
pedalling, as with a normal bicycle. The walk assistance cannot be activ-
ated at this assistance level.
– ECO: Effective assistance with maximum efficiency, for maximum range
– TOUR/TOUR+:
TOUR: Steady assistance, long range for touring
TOUR+: Dynamic assistance for natural, sporty cycling (only in conjunc-
tion with eMTB)
– SPORT/eMTB:
SPORT: Powerful assistance, for mountain biking and cycling in urban
traffic
eMTB: Optimum assistance whatever the terrain, rapid acceleration
when starting from a standstill, improved dynamics and top performance
(eMTB only available in combination with the drive units BDU250P CX,
BDU365, BDU450 CX and BDU480 CX. A software update may be re-
quired.)
– TURBO: Maximum assistance even at a high cadence, for sporty cycling
To increase the assistance level, press the + (12) button on the operating
unit repeatedly until the desired assistance level appears on the display. To
decrease the assistance level, press the – (11) button.
The requested drive power appears on the display h (see "Start page",
page English – 28). The maximum drive power depends on the selected
assistance level.
If the on-board computer is removed from the holder (5), the assistance
level that was last displayed is saved.
Bosch eBike Systems
English – 19
1 270 020 Ken | (07.09.2023)