Starting Operation Of The Ebike; Requirements; Switching The Ebike On And Off; Power Supply Of The On-Board Computer - Bosch Kiox Original Operating Instructions

Starting Operation of the eBike

Requirements

The eBike can only be activated when the following requirements are met:
– A sufficiently charged eBike battery is inserted (see operating instruc-
tions for the eBike battery).
– The on-board computer is properly fitted in the holder.

Switching the eBike On and Off

The following options are available for switching on the eBike:
– Once the on-board computer and the eBike battery are fitted, briefly
press the on/off button (4) on the on-board computer.
– With the on-board computer inserted, push the on/off button on the
eBike battery (bicycle manufacturer-specific solutions are possible when
there is no access to the eBike battery on/off button; see the eBike bat-
tery operating instructions).
The drive is activated as soon as you start pedalling (except if you are using
the walk assistance function or if the assistance level is set to OFF). The
drive power varies depending on the assistance level set.
As soon as you stop pedalling when in normal operation, or as soon as you
have reached a speed of 25/45 km/h, the drive switches off the assistance.
The drive is automatically reactivated as soon you start pedalling again and
the speed is below 25/45 km/h.
The following options are available for switching off the eBike:
– Briefly press the on/off button (4) of the on-board computer.
– Switch off the eBike battery using its on/off button (bicycle manufac-
turer-specific solutions are possible when there is no access to the eBike
battery on/off button; see the bicycle manufacturer operating instruc-
tions).
– Remove the on-board computer from its holder.
If no power is drawn from the drive for about 10 minutes (e.g. because the
eBike is not moving) and no button is pressed on the on-board computer or
the operating unit of the eBike, the eBike will switch off automatically.

Power supply of the on-board computer

If the on-board computer is in the holder (5), a sufficiently charged eBike
battery is inserted into the eBike and the eBike is switched on, then the on-
Bosch eBike Systems
English – 16
1 270 020 Ken | (07.09.2023)