Select Program Mode - Asko DBI364IS U Series User Manual

Table of Contents

Advertisement

Time
The program adapts to the specified running time or finish time. With this program, it is important to
choose a time suited to how dirty the dishes are.
Press
to set the desired program time.
0:15-0:45
Lightly soiled dishes
1:00-1:30
Normally soiled dishes
2:00-2:30
Heavily soiled dishes
Sanitize
This program is recommended for baby bottles and cutting boards when additional sanitation is
required. The temperature is high in the main wash and in the final rinse.
Rinse and hold
Use to rinse dishes while you wait for the dishwasher to become fully loaded.
Self-cleaning
Self-cleaning program for sanitizing the dishwasher tub, spray arms, and spray pipes.
This program should be run (with no dishes in the machine) using regular dishwasher detergent or
citric acid. Special dishwasher cleaners are also available in stores. For the removal of limescale
deposits, see Dishwasher tub in the chapter Care and maintenance instructions.
3)
Anti-odor
This program prevents bad odors from dirty dishes left in the dishwasher. Only the dishwasher's fan
is activated (at regular intervals over a period of 72 hours).

Select program mode

Press
to scroll through the available program modes. The symbol is dimly lit in available program
modes and glows brighter when a program mode has been activated. (The program modes you
can select vary between programs.)
Speed
The program time is shortened, but the dishwasher uses more energy.
Night
Lower noise level during the dishwashing program. The program time is extended.
Heat boost
The higher temperature dissolves grease on very dirty dishes, but the dishwasher consumes more
energy and water. The program time is extended.
3)
Activate Odor control in the dishwasher's Settings menu. See the Settings chapter.
Using the dishwasher
19

Advertisement

Table of Contents
loading

Table of Contents