Select Program Mode - Asko DFI564D.AU User Manual

Time program
The program adapts to the specified running time or finish time. With this program it is important to
choose a time suited to how dirty the dishes are.
Press to set the desired program time.
0:15-0:45 Slightly dirty dishes
1:00-1:30 Normally dirty dishes
2:00-2:30 Very dirty dishes
Hygiene
This program is designed to meet strict hygiene demands.
Rinse and hold
Used to rinse dishes while you wait for the dishwasher to become fully loaded.
Self-cleaning
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using normal dishwasher detergent or
citric acid. Special dishwasher cleaners are also available on the market. For the removal of lime
scale deposits, see Dishwasher tub in Chapter Care and cleaning.
3)
Anti-odour
This program prevents bad odours from dirty dishes left in the dishwasher. Only the dishwasher fan
is activated (at regular intervals during a period of 72 hours).

Select program mode

Press to scroll through the available program modes. The symbol is dimly lit in available program
modes and glows brighter when a program mode has been activated. (The program modes you
can select vary between programs.)
Speed
The program time is shortened, but the dishwasher uses more energy.
Night
Lower noise level during the dishwashing program. The program time is extended.
3)
Activate Odour control in the dishwasher Settings menu. See the Settings chapter.
Using the dishwasher
19