Select Option; Start/Stop - Asko DBI364IS U Series User Manual

Table of Contents

Advertisement

Using the dishwasher

Select option

Available options are dimly lit. Select the options (
when activated. (The options you can select vary between programs.)
Auto door open
The dishwasher door opens automatically, which shortens the program time and improves the drying
results. Wait until the dishwasher indicates that the program has ended and the dishes have cooled
before unloading the dishwasher.
The drying time of the Auto door open option varies (from 5 to 90 minutes) depending on the model,
program, and temperature of the final rinse.
The Auto door open option is pre-selected for some programs.
NOTE!
For the best drying results, do not close the door before the drying phase has finished and the
machine has automatically switched off.
WARNING!
The dishwasher door must not be blocked or closed when opened automatically. Doing so may
damage the door lock mechanism. Wait at least 5 minutes before closing the door.
Delayed start
When you select Delayed start, the dishwasher will start 1-24 hours after you press
1. Press
once to activate Delayed start. Press several times, or hold it in, to set the desired
number of hours.
2. Press
. The timer counts down and the dishwasher starts after the selected delay.
If you want to cancel the Delayed start option, press and hold

Start/Stop

Close the door properly, otherwise the dishwasher will not start. Press
"Program started, close door in 4 sec".
If the dishwasher is not started within 2 minutes of the last time the control panel was pressed, the
machine switches off.
Cancel or changing a program
In order not to accidently press a button and cancel the current program, you must press and hold
for three seconds if you want to change programs after starting the dishwasher. Add more
detergent if the lid of the detergent dispenser has opened. Then select a new program and press
within four seconds.
Time remaining
Once you have chosen a program, program mode, and options, the time the program took when
last used is displayed.
Once you have started the dishwasher, the display shows the remaining program time. The remaining
time is updated during the drying phase.
20
,
) to activate them. The options glow brighter
for three seconds.
.
until the display shows

Advertisement

Table of Contents
loading

Table of Contents