Cisco 1700 Hardware Installation Manual page 40

Remove and Replace a Drive
• Emergency shutdown—Press and hold the Power button for four seconds to force the main power off and immediately
enter standby mode.
Remove and Replace a Drive
The drives are hot-swappable. You do not have to shut down the chassis to remove or replace drives.
Caution
Safety Warnings
Warning
Warning
Warning
Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide
36
You cannot add more drives to the chassis. You can only replace the drives in the slots that are supported for
your model. See Front Panel, on page 6
Take note of the following warnings:
Statement 1028 More Than One Power Supply
This unit might have more than one power supply connection. To reduce risk of electric shock, remove
all connections to de-energize the unit.
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1089 Instructed and Skilled Person Definitions
An instructed person is someone who has been instructed and trained by a skilled person and takes the
necessary precautions when working with equipment.
A skilled person or qualified personnel is someone who has training or experience in the equipment
technology and understands potential hazards when working with equipment.
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
for the drive configurations.
Installation, Maintenance, and Upgrade