Table of Contents
Advertisement
SERVICING YOUR MOWER
Spark Arrester Service
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
1. Allow the engine to cool, then remove the three bolts [1] from the
muffler shield [2]. Remove the muffler shield.
2. Remove the two set screws [3] and remove the spark arrester [4].
3. Check for carbon deposits on the spark arrester and the exhaust
port. Use a brush to remove any carbon deposits from the screen.
Replace the screen if it is torn or damaged.
4. Installation is the reverse of removal. Tighten all hardware
securely.
[3] (2)
[1] (3)
[2]
FLYWHEEL BRAKE
Start the engine outdoors and move the throttle to FAST. Release the
flywheel brake lever; the engine should stop quickly. If it does not, take
your mower to an authorized Honda servicing dealer for repair.
36
[4]
MUFFLER
E
Advertisement
Table of Contents
