Table of Contents
Advertisement
UNPACKING
Thisproductrequires a ssembly.
[] Carefully l ift sawfromthecartonandplaceit on a level
worksurface.
NOTE: Thistoolis heavy. T oavoidbackinjury, l ift with
yourlegs,notyourback,andget helpwhenneeded.
[] hspectthetoolcarefully t o makesurenobreakage o r
damage occurred duringshipping.
[] Donotdiscard thepacking material untilyouhave
carefully inspected andsatisfactorily o perated thetool.
[] Thesawisfactorysetforaccurate cutting. A fter
assembling i t, checkforaccuracy, f fshipping has
influenced t hesettings, r efertospecificprocedures
explained inthis manual.
[] ff anypartsaredamaged or missing, please call
1-800-932-3188 forassistance.
_
WARNING:If anypartsaremissing, do notoperate
thistooluntilthe missing partsarereplaced. Failure
to do socouldresult i n possible serious personal
injury.
TABLE
ALIGNING
BOLT
TABLE
LOCK
HANDLE
WARNING:Donotattempt t o modifythistool
or create accessories notrecommended foruse
withthistool.Anysuchalteration or modification i s
misuse andcouldresultina hazardous c ondition
leading to possible serious personal injury.
Fig.5
_ll WARNING:Donotconnect t o power supplyuntil
assembly i s complete. F ailure t o complycouldresult
inaccidental starting andpossible serious personal
injury.
MOUNTING
THE SAW TABLE
See Figures 5 - 6.
_
WARNING:
Always make sure the band saw is
securely mounted to a workbench or an approved
work stand. Failure to heed this warning can result in
serious personal injury.
[] Remove the angle adjustment knob from the side of
the saw housing.
NOTE: Take care when removing the nut and washer
from the center of the angle adjustment knob. There is
a spring in the center that is released after the nut and
washer are removed.
[] Remove the table aligning bolt, washer, and wing nut
from the saw table.
[] Standing at the front of the band saw, slide the saw
table through the slot moving from the right side of the
saw table to the left.
12
TABLE
LOCK
HANDLE
ANGLE
ADJUSTMENT
KNOB
Advertisement
Table of Contents
