Panasonic CZ-RTC4A Operating Instructions Manual page 24

Troubleshooting
The remote
controller screen
displays a fl ashing
"
The remote
controller screen
does not display the
or
• If you need to contact for servicing, check the back cover of the operating instructions for indoor
units or outdoor units.
24
".
.
● Faulty sensor or incorrect installation.
Turn OFF the ECONAVI function with the
remote controller and contact the retailer or
point of purchase with the Model No. and
problem.
● The indoor unit has stopped. Turn on the
indoor unit.
● The unit is in Fan mode. The ECONAVI
function does not operate in Fan mode.
● The nanoe™X/ECONAVI function is set
to OFF. Turn the nanoe™X/ECONAVI
function ON with the remote controller.
● The indoor unit may not support the
ECONAVI function. If you turn the
ECONAVI function ON with the remote
control but there is no change, the indoor
unit does not support the ECONAVI
function.
The indoor unit may not support the
nanoe™X function. If you turn the
nanoe™X function ON with the remote
control, will appear instead.
Please contact the dealer.