Table of Contents
Advertisement
nanoe™X/ECONAVI Function
ON/OFF setting of nanoe™X/ECONAVI function
Using the remote controller, you can switch the nanoe™X/ECONAVI function ON/OFF.
1
Press [nanoe™X/ECONAVI]
• Each time the button is pressed, the
function changes in the following order.
nanoe™X ON
ECONAVI ON
nanoe™X OFF
ECONAVI ON
nanoe™X ON
Exit setting
* When nanoe™X/ECONAVI is enabled,
2
* When the indoor unit is stopped,
Note
● Turn the ECONAVI function OFF if:
- You want to maintain the room temperature at a set temperature.
- You want to keep air conditioner running while nobody is in a room.
- The sensor fails.
- Only infants, babies, or people only with disabilities are in the room.
WARNING
Do not use the ECONAVI function in a room with disabled persons or infants only.
Due to their limited motions, the ECONAVI sensor may judge no person is present,
causing the indoor unit to stop the operation.
22
will appear.
will disappear.
°
A
1 / 2
1 / 2
Advertisement
Table of Contents
