Panasonic CZ-RTC4A Operating Instructions Manual page 11

Timer remote controller

Hide thumbs Also See for CZ-RTC4A:

Table of Contents

Weekly Program Function

Set the program pattern. (Program step 3)

There are 4 program patterns.

Pressing [▼/▲] repeats the following display patterns.

Pattern 1 (Default display)

The indoor unit starts operation at the

programmed time.

Pattern 4

The indoor unit starts operation at the

programmed time and changes the

temperature settings.

For Pattern 3 and Pattern 4: Press [

Select the program pattern and press [SET].

The program timer setting is conﬁ rmed and the unit enters the conﬁ rmation mode

Note

● If you press [CANCEL] during the setting, it returns to the program conﬁ rmation

mode.

● If there is no operation made for 10 minutes during the setting, it returns to the

normal mode.

In this case, all the settings in progress will be invalid.

Pattern 2

The indoor unit stops operation at the

programmed time.

Pattern 3

The indoor unit changes the

temperature setting at the

programmed time.

] to change the temperature setting.

Table of Contents