Table of Contents
Advertisement
mail is composed off-line and is sent to the intended recipient(s) the next time you perform
ActiveSync.
1.
From the Today screen, tap Main Menu > Message > Outlook E-mail.
2.
Press the right soft key function Menu > New.
3.
Enter the E-mail address in the To field.
4.
Tap the Subject field and enter a subject.
5.
Tap the Message field and enter the content of your E-mail.
6.
When you're finished, press the left soft key function Send.
Using an ISP for E-mail
If you've configured your Omnia to send E-mail using an Internet Service Provider (ISP),
you can send E-mail directly from your Omnia without connecting to your PC through
ActiveSync.
Tip: Before you can send and receive E-mail using your ISP, see "Setup of an ISP" on
page 63.
Setup of an ISP
Before you can send E-mail directly, you'll need to configure your Omnia to work through
an existing account with an Internet Service Provider (ISP) or your network at work. To
configure your Omnia to work with an ISP:
1.
From the Today screen, tap the right soft key function Main Menu > Message
> Setup E-mail.
2.
Enter your e-mail address and password. Tap Next.
3.
Tap Next again. Your Omnia will attempt to automatically find the mail settings
for your account.
4.
If successful, proceed to Step 6 > Step 10. If not, tap Next to proceed for the
next step.
5.
Select Internet e-mail form the drop down box.
6.
Enter your name, select Next.
7.
Enter the incoming mail server address and choose the Account Type. Tap
Next.
8.
Type in your Username, Password and if desired, check the Save Password
box. Tap Next.
63 Messaging
Advertisement
Table of Contents
