Table of Contents
Advertisement
Signal
You can change the following settings:
volume for button signals
▯
volume for indicator signals
▯
To change these settings always activate adjustment
mode first.
Activate adjustment mode
Select Cotton Normal on Position 1.
1.
The appliance is on.
Hold down Start/Pause and turn the Program Selector
2.
to the right (Position 2). Release Start/Pause button.
Adjustment mode is now activated and the default
volume for indicator signals appears in the display.
Changing the volume
You can set the volume by touching the Finish in button
with the program selector in one of the following
positions:
Position 2: for indicator volume
▯
Position 3: for button signals volume
▯
Quit adjustment mode
Turn the Cycle Selector to Off position. The settings were
saved.
0 = off, 1 = soft,
2 = mid, 3 = loud,
4 = very loud
25
Advertisement
Table of Contents
