Table of Contents
Advertisement
Drainage
2、Con�nuous drainage
If you don't want to fill the tank frequently, you can connect the standard 0.6-meter
drain pipe at the back of the unit. Garden hoses with standard threads can also be
prepared with and outer diameter of 1 inch (1.0625 inches or 26.98mm) and a pitch
of 11.5TPI.
1
Locate the drain outlet at the
back, unscrew the drain cover.
2
Connect the 9.0mm water pipe
to the drain.
A�en�on: The external drain pipe must not be too long (recommended length is less
than 0.6 meters). The height of the end of the drain pipe must be more than
10cm below the height of the fuselage outlet. The drain pipe must be kept
smooth, otherwise the water may not be drained normally.
30
or
1
2
1 Locate the drain outlet at the back,
unscrew the drain cover.
2 Screw the standard threaded
garden hose onto the threaded drain.
2
1
Advertisement
Chapters
Table of Contents
