Troubleshooting - Creative Cobra 2 USB User Manual

To uninstall Creative
GamePad 2 USB

Troubleshooting

If your GamePad still cannot
work properly in some games
after calibration, refer to the
games' calibration instructions.
10 Creative GamePad 2 USB
It is very easy to uninstall the Creative GamePad 2 USB. Just unplug the GamePad from your
computer's USB port.
Your GamePad 2 USB may not work properly in some games.
To calibrate your GamePad 2 USB:
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the Game Controllers icon.
The Game Controllers dialog box appears, with the General tabbed page displayed and the
Creative GamePad 2 USB highlighted.
3. Click the Properties button.
The Game Controller Properties dialog box appears.
4. Click the Settings tabbed page.
5. Click the Calibrate button.
The Controller 1 Calibration dialog box
similar to Figure 9 appears with instructions to
set your GamePad 2 USB's Calibration
Information.
6. Click the Next button successively to set the
rest of the Calibration Information.
7. Click the Finish button.
The Game Controller Properties dialog box
appears.
8. Click the Test tabbed page.
9. Press the Directional pad, buttons and slide the
throttle on your GamePad 2 USB.
The corresponding buttons in the tabbed page light up in red.
10. Once testing is complete, click the Apply button and then click the OK button.
Figure 9: The Controller 1 Calibration
dialog box.