To configure Creative
USB GamePad II for the
first time in Windows
2000
6 Creative GamePad 2 USB
6. Remove the installation CD and insert
the Windows 98 CD when you are
prompted to do so and then click OK.
After the driver is installed, the dialog
box similar to Figure 5 appears.
7. Click the Finish button.
1. When you connect the Creative GamePad 2 USB to your system for the first time, Windows
2000 installs the default driver automatically.
2. Click Start -> Settings -> Control Panel.
The Control Panel window appears.
3. Double-click the System icon.
The System Properties dialog box appears, with the General tabbed page displayed.
4. Click the Hardware tab.
The Hardware tabbed page appears.
5. Click the Device Manager button.
The Device Manager window appears.
Figure 5: Installation of Creative GamePad 2 USB
driver is completed.