To Configure Creative Gamepad 2 Usb For The First Time - Creative Cobra 2 USB User Manual

To configure Creative
GamePad 2 USB for the
first time
Follow the installation
instructions carefully. The
GamePad may not operate
correctly in some games if
Creative's driver is not installed.
Refer to "To uninstall Creative
GamePad 2 USB" on page 10 to
install Creative's driver.
1. When you connect the Creative
GamePad 2 USB to your system
for the very first time, the dialog
box similar to Figure 4 appears.
2. Click the Next button.
3. Select Display a list of all the
drivers in a specific location, so
you can select the driver you
want and click the Next button.
An Add New Hardware
Wizard dialog box appears, with
USB Human Interface Device
highlighted.
4. Insert the Creative USB Game
Pad II CD and then click the Have Disk button.
An Install From Disk dialog box appears.
5. Click the Browse button and locate D:\WIN98 (where D: is your CD-ROM drive) and click
the OK button twice in succession.
The Add New Hardware Wizard dialog box reappears with Creative USB Game Pad II
highlighted.
Figure 4: The Add New Hardware Wizard dialog box.
User's Guide 5