Norcold N1095 Installation Manual
  1. Manuals
  2. Brands
  3. Norcold Manuals
  4. Refrigerator
  5. N1095 Series
  6. Installation manual
Norcold N1095 Installation Manual

Norcold N1095 Installation Manual

Thetford n1095: install guide
Hide thumbs Also See for N1095:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
For N109X and N109XXX models:
For N109XIM and N109XIMXX models:
The letter "X", in the model numbers above, stands for a letter or numeral which means a refrig-
erator option.
WARNING:
can cause personal injury or property damage. Refer to this manual.
For assistance or additional information, contact a qualified installer,
service agency, or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquid in
the vicinity of this or any other appliance.
FOR YOUR SAFETY
If you smell gas:
WARNING:
DO NOT install this refrigerator in below deck marine
applications. Do not install this refrigerator in a fixed indoor cabin or
other dwelling applications. This refrigerator must use only
NORCOLD designed and approved outside air intake and exhaust
ventilation for correct and safe operation. Any other ventilation could
cause lethal combustion exhaust fumes and/or explosive propane
gas fumes to be in the living area and/or to be below deck.
NORCOLD, Inc.
P.O. Box 4248
Sidney, OH 45365-4248
Improper installation, adjustment, alteration, service or maintenance
1. Open windows.
2. Don't touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier.

Installation Manual

10 cu.ft., 2-way R.V. refrigerators.
10 cu.ft., 2-way R.V. refrigerators with ice maker.
English
French
Part No. 628933A (2-06)

Advertisement

Table of Contents
loading

Related Manuals for Norcold N1095

Summary of Contents for Norcold N1095

  • Page 1: Installation Manual

    4. Immediately call your gas supplier. WARNING: DO NOT install this refrigerator in below deck marine applications. Do not install this refrigerator in a fixed indoor cabin or other dwelling applications. This refrigerator must use only NORCOLD designed and approved outside air intake and exhaust ventilation for correct and safe operation.

  • Page 2: Table Of Contents

    Be aware of possible safety hazards when you see the safety alert symbol on the refrigerator and in this manual. A signal word follows the safety alert symbol and identifies the danger of the hazard. Carefully read the descriptions of these signal words to fully know their meanings.

  • Page 3: Certification And Code Requirements

    If this air flow is blocked or decreased, the refrigerator will not cool correctly. Each NORCOLD model is certified by CSA International for correct ventilation.

  • Page 4: Key Refrigerator Dimensions

    These key refrigerator dimensions are for your reference as necessary (See Art01735). Refrigerator cabinet width w/o trim - 23.1 in..1 Refrigerator width overall w/ trim - 24.8 in..2 Refrigerator cabinet to side trim - 0.84 in..3 Refrigerator cabinet height w/o trim - 62.0 in.
  • Page 5 - If the design of the vehicle does not allow you to install a roof exhaust vent, install an upper side-wall exhaust vent. NOTE: The refrigerator is 23.7 in. min. to 24.0 in. max. from the rear of the breaker to the rear of the condenser [11] and 55.7 in.

  • Page 6: Reverse The Door Swing-Nonmetal Doors (Optional)

    - Reverse the front box and put it on the opposite side of the controls. - Attach the front box to the refrigerator with the screw [8] that was removed before. - Put the strike plate on the opposite side of the refrigerator [5b].

  • Page 7: Reverse The Door Swing-Metal Doors (Optional)

    Refrigerator” section of this manual. Reverse the Door Swing-Metal Doors (optional) This refrigerator has door hinges that allow you to change the direction the door opens by moving the hinges on a diagonal to the opposite side. Reverse the door swing before installing the refrigerator in the vehicle.
  • Page 8 - Reverse the front box and put it on the opposite side of the controls. - Attach the front box to the refrigerator with the screw [8] that was removed before. - Put the strike plate on the opposite side of the refrigerator [5b].

  • Page 9: Install The Decorative Door Panels (Nonmetal Door Models)

    The ice maker is assembled to the refrigerators at the factory as optional equipment. If the refrigerator does not have a factory installed ice maker, one can not be added to the refrigerator at a later time. The refrigerator installer must connect a cold water supply line to the solenoid valve at the rear of the refrigerator.

  • Page 10: Connect The Electrical Components

    - Attach a 1/4 inch Quick Connect terminal to each DC power supply wire. NOTE: Do not use the chassis of the refrigerator or the vehicle frame as one of the conductors. Attach the DC power supply wires only to the battery and the power board [1] of the refrigerator.

  • Page 11: Connect The Propane Gas Supply System

    If you use compressed air for the test: - The pressure of the compressed air at the manual shut off valve of the refrigerator must not be more than 1/2 psig (14 inches Water Column). - If the pressure of the compressed air is more than 1/2 psig...

  • Page 12: Do A Test Of The Gas Safety Valve

    - If “AU” “LP” appears in the center display, it means that: - 120 volt AC power is not available to the refrigerator. - The refrigerator is operating on propane gas. - After ten seconds, the “AU” “LP” goes off and only a green dot “.”...

  • Page 13: Fault Codes

    Fault Codes t l u t l u a l i " " r " " " " " " " " a l i a t l " " " " " " " " t i n a l f "...
  • Page 14 Installation Manual 14...
  • Page 20 Art01727...

This manual is also suitable for:

N1095bkN1095imN1095imbkN1095imssN1095imvN1095ss ... Show all

Table of Contents