Table Of Contents - GE CVM517P2RS1 Installation Instructions Manual

DAMAGE - SHIPMENT INSTALLATION
• If the unit is damaged in shipment, return the
unit to the store in which it was bought for repair or
replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
• If the unit is damaged by the installer (if other
than the customer), repair or replacement must
be made by arrangement between customer and
installer.
PARTS INCLUDED
HARDWARE PACKET
Part
Wood screws (1/4" x 2")
Toggle bolts (and wind
nuts) (3/16" x 3")
Self-aligning machine
screws (1/4" - 28 x 3
1/4")
Nylon Grommet (for
metal cabinets)
Tapping screws (for
attaching the damper
duct connector)
One power cord clamp
and One dark-colored
mounting screw (to hold
the power cord)
You will find the installation hardware contained
in a packet with the unit. Check to make sure you
have all these parts.
NOTE: Some extra parts are included.
31-7000092 Rev. 2
Installation Instructions
Quantity
2
2
2
1
3
1
ADDITIONAL PARTS
Part Quantity
Top Cabinet 1
Template
Rear Wall 1
Template
Installation 1
Instructions
Separately 2
Packed Grease
Filter
Cover plate (for 1
Room Venting
installation)
5