Table of Contents
Advertisement
If the call alert page is sent successfully, you hear
a tone and the display shows Ack received.
The radio returns to the Home screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen of
Contacts.
Emergency Operation
The Emergency feature is used to indicate a critical
situation.
If the Top (Orange) button is preprogrammed to send an
emergency signal, this signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
•
Emergency Alarm
•
Emergency Call (Trunking Only)
•
Emergency Alarm with Emergency Call
•
Silent Emergency Alarm
Check with your dealer or system administrator for more
information on the programming of this feature.
Each channel can only assigned one of the Emergency
modes above. The radio responds differently when
pressing the preprogrammed Emergency button in each
channel.
To exit emergency at any time, press and hold the
preprogrammed Emergency button for about a second.
NOTICE:
The timer is programmable from 0–6250
milliseconds by a qualified technician.
Dispatch console that supports this feature can be
programmed to clear the emergency state of the radio.
Check with your dealer or system administrator for more
information on dispatch console supporting this feature.
The radio operates in the normal dispatch manner while in
Emergency Call, except if enabled, it returns to one of the
following:
Tactical/Non-Revert
The radio sends emergency alarm and/or make
emergency call on the current selected channel.
Non-Tactical/Revert for Conventional system
The radio reverts to the preprogrammed emergency
channel to send alarm and/or make emergency call.
English
99
Advertisement
Table of Contents
