Chapter 02
Preparations
Installation
Attaching the Stand
― Disassembly is the reverse order of assembly.
x 2
3
4
Remove the COVER STAND BODY REAR
Insert the stand base into the stand
by pulling it in the direction as shown
neck in the direction as shown in the
in the figure.
figure.
1
x 4
Connect the corresponding cables.
5
Place the stand neck on the monitor as
shown in the figure.
2
Collect cables and then align them with the centre groove of COVER REAR SUB.
Assembly the COVER REAR SUB on the rear of the product.
6
Fasten the screws at the top of the
stand neck.
9