Using Touch Pen To Launch Ezwrite - BenQ RP8603 User Manual

Remote control usage tips
• When using the remote control, aim the remote control at the sensor at the display's
bottom-right side within a distance of less than 8m, and a horizontal and vertical angle
of less than 60 degrees.
• Avoid getting the remote control wet or store it in humid environments (like
bathrooms).
• If the display's remote control sensor window is exposed to direct sunlight or strong
light, the remote control may not operate properly. In this situation, change the light
source, readjust the angle of the display, or operate the remote control from a location
closer to display's remote control sensor window.

Using touch pen to launch EZWrite

Tap the thick tip of the touch pen on the display's NFC sensor to launch EZWrite. Note
that the horizontal and vertical angle should be less than 30 degrees.
Max. 8 m
30 °
Parts of the display and their functions
15
30 °