Table of Contents
Advertisement
Available languages
Available languages
CD OR CD+G OPERATION
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
number of tracks will be shown on the LED window).
SKIP PLAY (FOR BOTH CD AND CDG DISCS)
!
During STOP mode, you can skip up or down to your desired track number by pressing the
SKIP button(
- SKIP -
!
To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (FOR AUDIO CD DISC ONLY)
When playing any audio CD, press and hold the SKIP button (
search at high speed in the forward or backward direction. Normal play will continue when you
release the button.
REPEAT
!
To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will
start to flash.
!
To repeat all tracks, press the REPEAT button twice. The REPEAT LED will light up and stay
lit.
!
To clear the REPEAT function, press the REPEAT button again. The REPEAT LED will turn
off.
PROGRAM
!
Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [
Step 2: Press the double arrow keys (
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a
maximum of 20 tracks.
Step 4: Press PLAY to activate PROGRAM.
!
Press the STOP button to clear all the programmed entries.
RADIO OPERATIONS
AM/FM RADIO
1.
Press the ON/OFF button.
2.
Switch FUNCTION Selector to RADIO position.
3.
Switch BAND selector to either AM, FM or FM (ST.) radio position.
4.
For FM or FM (ST.) reception, use directional antenna on back of unit for best signal.
(AM antenna is built-in).
5.
Turn TUNING knob to select desired station as indicated on dial.
6.
Adjust MASTER VOLUME to your pleasure.
7.
To turn the radio off, set FUNCTION Selector to CDG/AUX position.
).
-SKIP-
E13
-SKIP-
). The CD will
].
) to select a desired track.
Advertisement
Table of Contents
