Table of Contents
Advertisement
Camera and Camcorder Settings
This section describes the different settings that you can
configure on your camera. Not all of the following options are
available in both still camera and video camera modes. The
available options vary by mode.
1. From the viewfinder, tap
Settings)
.
2. The follow settings are located under the Camera,
Camcorder and General tabs. The settings that are
displayed will depend on what camera mode you
are in.
Camera:
• Photo size: Select a resolution for photos. Use higher
resolution for higher quality. Higher resolution photos take up
more memory.
• Burst shot: Take multiple shots in quick succession by
tapping and holding the Camera key.
• Face detection: This option places the focus on any faces
that are detected when you take a photo.
• Metering: Select the area of the image where exposure is
measured (Centre-weighted, Matrix or Spot).
(Camera
➔
• ISO: determines how sensitive the light meter is on your
digital camera. Choose from Auto, 100, 200, 400, or 800. Use
a lower ISO number to make your camera less sensitive to
light, a higher ISO number to take photos with less light, or
Auto to let the camera automatically adjust the ISO for each
of your shots.
• Anti shake: Compensates for camera movement.
• Auto night detection: Camera detects low light and
automatically adjusts live view, allowing you to take pictures
at night without using the flash.
• Save as:
Camcorder:
• Video size: Select a resolution for videos. Use higher
resolution for higher quality. Higher resolution videos take up
more memory.
• Video stabilization: Activate or deactivate Optical Image
Stabilization.
Multimedia
87
Advertisement
Table of Contents
