Table of Contents
Advertisement
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless
Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 155.
Wi-Fi Advanced Settings
The Advanced Wi-Fi menu allows you to set up many of your
device's advanced Wi-Fi services.
1. From the Home screen, tap
Connections ➔ Wi-Fi.
2. Press
➔ Advanced.
The following options are available:
• Network notification: alerts you when a new open WAP is
available.
➔ Settings ➔
• Passpoint: allows you to connect to passpoint-enabled Wi-Fi
Access Points automatically. Touch and slide the slider to the
right to turn it on
• Keep Wi-Fi on during sleep: allows you to specify when to
disconnect from Wi-Fi.
• Check for Internet service: Checks if Wi-Fi internet service is
available when connected to an AP (Access Point).
• MAC address: view your device's MAC address, required
when connecting to some secured networks (not
configurable).
• IP address: view your device's IP address.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for Wi-Fi
Direct.
1. From the Home screen, tap
Connections ➔ Wi-Fi.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi ON
.
➔ Settings ➔
.
Connections
155
Advertisement
Table of Contents
