Craftsman 315.115042 Owner's Manual page 9

For ease of operation and maintainingpropercontrol, hold
your sander only bythe handles provided.Also, as men-
tioned previously,hold it firmlywith both hands at all times.
Never grasp the front or sides of the tool body, or by any
other means during use.
A WARNING: This tool has been designed for hand
held usa only. To prevent possiblesedous injury,
do not clamp it upside downto a bench and attempt
to use it as a bench tool. It would be impossibleto
controland you would have no protectionagainst
dust, sparks, loose particles,etc.
CAUTION: Because of the mtaUng disc nature of
your tool, always stay constantlyaware of the
A
power cord, cord plug, extension cord and
extension cord plugs. They could get caught in the
rotatingspindle, wrap around it, and cause possible
sedous injury.
WARN ING: If you convert your sander to a
gdnder,you must purchase the appropriate
gdndingwheel and grindingwheel guard. Any
attempt to use this tool as a grinder without a guard
would be misuse and could result in possible
serious injuw.
DONOTA'I'TEMPT T O USEASABENCH TOOL
THE FOLLOWING RECOMMENDED ACCESSORIES ARE
CURRENTLY AVAILABLE AT SEARS RETAIL STORES.
7-in. Sanding Kit Item No. 911157
Aluminum Oxide Sanding Discs
Guard Item No, =1711
(Available through catalog sales only)
50' 14 A.W.G. Ext. Cord Item No. _5821
Wire Cup Brush Wheel Item No. Jl64106
Carrying Case Item No. _1472C
Gdnding Wheel Item No. _64101
100' 14 A.W.G. Ext. Cord Item No. _83508
,_ WARNING: The use of attachments or accessories not listed above might be hazardous,