Page 1
When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
Benchmark Commissioning Checklist. You can check your installer by calling Gas Safe Register direct on 0800 4085500. Ideal Boilers is a member of the Benchmark scheme and fully supports the aims of the programme. Benchmark has been introduced to improve the standards of installation and commissioning of central heating systems in the UK and to encourage the regular servicing of all central heating systems to ensure safety and efficiency.
BOILER OPERATION Legend A. CH temperature control B. Mode Control Knob C. Boiler Status BOILER BOILER D. Burner ‘on’ indicator E. Function Button ºC F. Restart Button G. Pressure Gauge H. Central Heating Economy Setting RESTART TO START THE BOILER EFFICIENT HEATING SYSTEM OPERATION If a programmer is fitted refer to separate instructions for the The boiler is a high efficiency, condensing appliance which will...
CONDENSATE DRAIN GENERAL INFORMATION This appliance is fitted with a siphonic condensate trap system BOILER PUMP that reduces the risk of the appliance condensate from freezing. The boiler pump will operate briefly as a self-check once every 24 However should the condensate pipe to this appliance freeze, hours, regardless of system demand.
Registered Engineer or in IE a Registered Engineer or in IE a Registered Gas Installer (RGII) Registered Gas Installer (RGII) FOR ANY QUERIES PLEASE RING THE IDEAL CONSUMER HELPLINE : 01482 498660 NOTE. BOILER RESTART PROCEDURE - To restart boiler, press the “RESTART” button. User’s...
NORMAL OPERATION DISPLAY CODES DESCRIPTION DISPLAY CODE ON BOILER The boiler is in standby operation awaiting either a central heating call or hot water demand. The boiler has a call for central heating but the appliance has reached the desired temperature set on the boiler.
In IE contact a Registered Gas Installer (RGII). Fan Fault Restart the appliance - if the boiler fails to operate then please contact Ideal (if under warranty) or alternatively a Gas Safe Registered Engineer if outside of the warranty period.