Erasing Data In The Image Memory Card - Nikon E2 Instruction Manual

I
Erasing data in the Image Memory Card
There are two ways to erase the image data stored in the Image
Memory Card .
1) Erasing the data frame by frame .
2) Initializing the memory card (batch erasing)
1. Deleting data frame by frame
Lightly press the shutter release button ;
within 16 seconds, push the ERASE LAST
buttons simultaneously and hold for at
least 1 second.
The most recently recorded data will be
erased and the frames-shot counter in the
LCD panel and the viewfinder will co unt
down by one frame.
-To continue erasing data, remove your finger
once and press the buttons again.
Initializing the memory card
(batch erasing)
Lightly press the shutter release button ;
within 16 seconds, push the FORMAT
(ERASE) buttons simultaneously and hold
for at least 1 second .
All recorded data will be erased and the
frames-shot counter in the LCD panel and
the viewfinder will return to 1.
When using a new Image Memory Card,
be sure to initialize the card .
-Erasing time varies depending on the type of
ca rd and storage capacity.
50