Table of Contents
Advertisement
12.8 Programme phase indicators
When the programme starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running:
.
When the phase ends the relevant indicator
stops flashing and is steady on. The next
phase indicator starts flashing.
E.g. the rinse phase is running:
12.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the button Inicio/Pausa.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Inicio/Pausa again.
The washing programme continues.
12.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to activate
the appliance.
Now, you can set a new washing programme.
If the ProSense phase is already carried
out and the water filling is already
started, the new programme starts
without repeating the ProSense phase.
The water and the detergent are not
drained out in order to avoid waste. The
display shows the maximum duration of
the programme, updating it about 20
minutes after the starting of the new
programme.
26
ENGLISH
12.11 Opening the door - Adding
garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level of the water
in the drum are too high and/or the drum
still rotates you cannot open the door.
1. Touch the Inicio/Pausa button.
In the display the related door lock indicator
.
goes off.
2. Open the appliance door. If necessary,
add or remove the items.
3. Close the door and touch the Inicio/Pausa
button.
The programme or the delay start continues.
4. The door can be opened when the
programme is complete, or set spinning
or draining programme/option and than
press Inicio/Pausa button.
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active).
In the display all washing phase indicators
become steady and the time area shows .
The indicator of the Inicio/Pausa button goes
off.
The door unlocks and the indicator
off.
1. Press the On/Off button to deactivate the
appliance.
goes
Advertisement
Table of Contents
