Uniden DSS2465 Quick Start Manual page 66

UP308BH (DSS2465) ENG OM 1/14/05
Call Transfer Feature
From handset to handset or to the base
1) During a call, press
2) Select a handset or the base to transfer the call to
within 10 seconds (refer to step 2 under "From handset
to handset or to the base" in the intercom section).
The call will automatically be placed on hold, and an
intercom tone sounds. To cancel the transfer, press the CANCEL soft key,
3) On the receiving handset, to answer the page, press
ANSWER soft key (or
(when AutoTalk is On). The intercom mode is activated, but the caller is still on hold.
4) To speak to the caller, press
(talk) on the base).
From the base to a handset
1) During a call, press
on hold.
2) Select the handset you want to talk with by pressing the number key (1-4). To page all
the handsets press
3) On the receiving handset, to answer the page, press
ANSWER soft key. Or press any number key,
On), or pick up the handset from the cradle (when AutoTalk is On). The intercom mode
is activated, but the caller is still on hold.
4) To speak to the caller, press
[ 60 ]
11:49 AM Page 60
on the handset.
or the BACK soft key on the initiating handset.
or (talk) on the base). Or press any number key,
, or (when Anykey Answer is On), or pick up the handset from the cradle
or
on the base. The call will automatically be placed
. An intercom tone sounds. To cancel the transfer, press
or (talk) on the base.
or
Get other manuals https://www.bkmanuals.com
H o l d , t o t r a n s f e r
H a n d s e t # 2
H a n d s e t # 3
BACK BACK OK
,
, , or the
on the receiving handset (or
, , or the
, or (when Anykey Answer is
on the receiving handset