Using Your Answering System - Uniden DSS2465 Quick Start Manual

UP308BH (DSS2465) ENG OM 1/14/05

USING YOUR ANSWERING SYSTEM

The message counter displays the number of messages stored in memory. If the display
flashes, then there are new messages waiting for you. The answering system is designed to
play your new messages first. After you play all your new messages, you can then play your
old messages.
Playing your messages
1) When the phone is in the standby mode, press
The system announces the number of new and old messages while the message counter
displays only the number of new messages. The time and day that each message was
received is announced after the message is played.
2) When all new messages have been played, you hear a confirmation tone and the system
announces "End of message". The system returns to standby. After you have reviewed
your new messages, you can play your old messages by again pressing
Once you have listened to a new message, it then becomes an old message. The old
messages will be played in the order in which they were received.
Repeating a message
1) Press to review your messages. The number of stored messages is announced.
2) To repeat the current message, press
the message. To quickly scroll backwards through a message, press and hold
To repeat the previous message, press
seconds during remote operation) after a message begins playing. If you have several
messages, press /SELECT repeatedly until you return to the message you want to
replay. If the current message is the first new message, the system plays back from the
beginning of the current message (it does not go back into the old message group).
3) Press at any time to stop reviewing messages and return to standby.
The message counter shows the number of messages stored in memory.
11:48 AM Page 49
.
/SELECT after a few seconds of beginning
/SELECT within a few seconds (about 4
Get other manuals https://www.bkmanuals.com
• If an outside call is
received during this
operation, the
operation is canceled.
.
• To stop playing your
messages, press
/SELECT.
again at any time.
• When the answering
system is full, " "
appears on the base.
You should delete some
messages so that the
system can record new
messages. (Refer to
"Deleting a message"
on page 50.)
[ 49 ]