Table of Contents
Advertisement
UP409ZH (WDECT2315-2) OM
12/22/05
Global Setup
If you change one of the Global settings, you change the setting for all additional
handsets. Only one handset can change Global settings at a time.
Submenu name
Day & time
Name Tag (POP ID)
(Default is on)
Insert 0
Dial Mode
(Australia only)
(Default is tone)
Copy Phonebook
System Reset
System Reset is used to clear the handset's ID from the main base unit, or the
base ID from the handset.
Submenu name
Deregister HS
Replacing Base
[ 12 ]
3:26 PM
Page 12
Description
Set the day and time of your display (see page 17).
Display the stored name with the Caller ID telephone number, if the displayed
Caller ID telephone number is exactly the same as a number stored in the
phone book (see page 17).
Add "0" or "00" to the number, when you receive the Caller ID message
(New Zealand only) (see page 17).
Set the dial mode to tone or pulse (see page 18). Most phone systems use tone
dialing, which send DTMF tone through phone line. The default is tone dialing.
Depends on your dialing system, set the dial mode.
Allow you to transfer the phonebook data stored in one handset to another
handset (see page 18).
Description
Clear the handset ID from the base. Use this option, for example, when you change
the digital security code (see page 19).
Clear the base ID. Use this option, for example, if you wish to deregister the base
to use the handset with another base of the WDECT2315 and WDECT2355 series
(see page 19).
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
