Rewinding Film - Nikon N90 AF Instruction Manual

REWINDING FILM
1 Film advance stops automatically at end of rol l with
End
and
Gl_
symbol in LCD panel blinking. (Audible beeper
sounds if set.)
At the end of fi lm roll, each time you press shutter release
button,
End
and
Gl_
blink and audible beeper sounds (if set),
reminding you to rewind film.
eJ ~ Or!lF
~
2 Press
~
button and
~
button to start film rewind. During
film rewind, Gl _ appears on LCD panel, and frame
counter counts backwards until rewind is complete.
• You can rewind film, before it reaches end of roll, in the same
manner .
• If film does not start rewind or if film rewind has stopped at
mid-roll, check battery power. If battery power is insufficient,
tum power switch off, replace batteries with a fresh set, tum
power on, then press the film rewind and film speed
setting/film rewind buttons again to restart film rewind.
• Do not open the camera back during film rewind. If the
camera back is opened, film rewind will stop at mid-roll; to
restart film rewind, press the
<il-"!
and
~
buttons again.
25