Table of Contents
Advertisement
Problem
Images are not displayed on
TV.
Nikon Transfer 2 does not
start when camera is
connected.
Images to be printed are not
displayed.
Cannot select paper size
with camera.
F14
Cause/Solution
• Video mode is not correctly set in the setup menu.
• Memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
• Memory card contains no images. Replace the
memory card.
• Remove the memory card to print images from the
internal memory.
Paper size cannot be selected from the camera in the
following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
A
87, E55
13
21
21
69, 74
–
71
74
13
69, E18,
E19
–
Advertisement
Table of Contents
