Table of Contents
Advertisement
Problem
Date and time of recording
are not correct.
No indicators displayed in
monitor.
Print date not available.
Date not imprinted on
images even when Print
date is enabled.
Screen for setting time zone
and date is displayed when
camera is turned on.
Camera settings reset.
Camera becomes hot.
Cause/Solution
• If camera clock has not been set, "Date not set"
indicator flashes during shooting and movie
recording. Images and movies saved before clock is
set are dated "00/00/0000 00:00" or "01/01/2012
00:00" respectively. Set the correct time and date
from the Time zone and date option in the setup
menu.
• Check camera clock regularly against more
accurate timepieces and reset as required.
Hide info is selected for Photo info.
Select Show info.
Time zone and date has not been set.
• The current shooting mode is one that does not
support Print date.
• The date cannot be imprinted on movies.
Clock battery is exhausted; all settings were restored
to their default values.
The camera may become hot when shooting movies
or uploading images from an Eye-Fi card for an
extended period of time, or when the camera is used
in a hot area; this is not a malfunction.
A
16, 86,
E41
86, E45
16, 86,
E41
86, E47
16, 19
–
F9
Advertisement
Table of Contents
