Table of Contents
Advertisement
Characteristics of Digital Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera
may stop functioning. In most cases, this phenomenon is caused by a strong external static
charge. Turn the camera off, remove and replace the battery, then turn the camera on again.
In the event of continued malfunction, contact your retailer or Nikon-authorized service
representative. Note that disconnecting the power source as described above may result in
the loss of any data not saved to internal memory or the memory card at the time the
problem occurred. Data already saved will not be affected.
Shooting Issues
Problem
Cannot switch to shooting
mode.
No image captured when
the shutter-release button is
pressed.
Camera cannot focus.
F10
Cause/Solution
Disconnect audio/video cable or USB cable.
• When camera is in playback mode, press the A
button or the b (e movie-record) button.
• When menus are displayed, press the d button.
• Battery is exhausted.
• When flash lamp flashes, flash is charging.
• Subject is too close. Try shooting using easy auto
mode, Close-up scene modes, or macro mode.
• The intended subject is one with which autofocus
does not perform well.
• Set AF assist in the setup menu to Auto (L26 only).
• Turn camera off and then on again.
A
69, 74,
E12,
E15
29
3, 5
21
50
34, 39, 55
28
86, E51
21
Advertisement
Table of Contents
