Table of Contents
Advertisement
6
Within 30 seconds, press the PRESET (
specify the minutes to start, then press the MEMORY but-
ton.
" The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
" " " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback starts.
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Note:
When performing timer playback using another unit connected to
the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2. At this
time, only this unit will be turned on or enter the power stand-by
mode automatically. It will enter the power stand-by mode 1 hour
after the timer playback starts. However, the other unit will not be
turned on or off.
! Sleep operation
or
) button to
1
Play back the desired sound source.
2
Press the SLEEP button and within 3 seconds, press the
MEMORY button.
To change the sleep time:
Whilst the sleep time is displayed, press the PRESET (
button.
(Maximum: 3 hours - Minimum: 5 minutes)
3:00
(cancel)
0:05
3
Within 30 seconds, press the MEMORY button.
4
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
The volume will turn down 30 seconds before the sleep opera-
tion finishes.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
03/8/20
XL-MP35H(H)E3.fm
XL-MP35H
ENGLISH
or
)
2:00
1:30
1:00
0:10
0:15
0:30
TINSZ0226SJZZ
8
E-22
Advertisement
Table of Contents
