Sharp XL-MP35H Operation Manual page 13

! Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
13
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
" Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
" Do not connect the attached FM aerial to an external aerial as
this may cause trouble.
Installing the AM loop aerial:
< Assembling >
! Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Caution:
" Use speakers with an impedance of 4 ohms
or more, as lower impedance speakers can
damage the unit.
" Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
Placing the speaker system:
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
! Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
< Attaching to the wall >
AC power lead of this unit into the wall socket.
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
Wall Screws (not supplied)
a malfunction or an accident may occur.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
03/8/20
Incorrect
XL-MP35H(H)E1.fm TINSZ0226SJZZ
XL-MP35H
ENGLISH
8
E-6