Mixing Material
NOTE: For an accurate test, be sure gauge is
completely dry and clean every time it is
used.
5.
Observe the ball on the material. When
the material is thin enough to spray the
ball will sink completely into the mixture
within 10 seconds.
READY
ti2498b
14
6.
7.
ADD
WATER
If the ball does not sink completely into
the mixture within 10 seconds, add more
water, agitate and try test again.
Once material is mixed pour material into
the sprayer hopper. See Operation,
page 15 for nozzle selection and sprayer
adjustments.
3A3258H