Technical Data - DeWalt DCD778M1 Manual

English
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD777, DCD778
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. Torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
4 4
WALT one of the
e
DCD777
V 18
DC
2
Li-Ion
min -1 0–500
min -1 0–1750
–
min -1
min -1
–
Nm 65/26
mm 1.5–13
mm 30
mm 13
mm –
kg 1.15
dB(A) 73
dB(A) 84
dB(A) 3
= m/s 2 4.3
2
m/s 1.5
2
m/s <2.5
m/s 2 1.5
= m/s 2 –
m/s 2 –
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
DCD778
and the accessories, keep the hands warm (relevant for vibration),
18
organisation of work patterns.
2
EC-Declaration of Conformity
Li-Ion
Machinery Directive
0–500
0–1750
Cordless Compact Drill/Driver
0–8500
DCD777
0–29750
Cordless Compact Drill/Driver/Impact Drill
65/26
DCD778
1.5–13
D WALT declares that these products described under
e
Technical Data are in compliance with:
30
2006/42/EC, EN62841-1:2015+A11:2022, EN62841-2-
13
1:2018+A11:2019+A1:2022+A12:2022.
13
These products also comply with Directive 2014/30/EU and
1.2
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
87
98
3
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
4.3
65510, Idstein, Germany
10.09.2021
1.5
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
<2.5
1.5
18.3
1.5
CORDLESS COMPACT DRILL/DRIVER
CORDLESS COMPACT DRILL/DRIVER/IMPACT DRILL
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+A11:2022, EN62841-2-1:2018+A11:2019+A1:
2022+A12:2022.
These products conform to the following UK Regulations:
DECLARATION OF CONFORMITY
2008
DCD777
DCD778
WALT at
e
WALT.
e