Table of Contents
Advertisement
11. Remove the Ambilight PWBs as earlier described.
12. Tilt the Ambilight subframes [5] after having removed the
screw.
4
3
5
2
3
Pay special attention to use the correct screws at the
proper location when mounting a new LCD panel!
Using the wrong screws will damage the LCD panel!
4.7
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position.
•
Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
Mechanical Instructions
4
1
2
Figure 4-29 LCD Panel
Now the LCD Panel can be lifted from the front cabinet.
2
back to
div. table
Q552.1L LA
4.
4
4
5
2
18771_112_100504.eps
EN 21
3
3
100504
2010-Dec-29
Advertisement
Table of Contents
